DC-DC step-down driver LRC-LDD-1000H

LDD-1500H
LDD-1500H

DC-DC step-down driver LRC-LDD-1000H

  • Supply Voltage, VАС: -
  • Rated Power, W: -
  • Power Consumption, W: -
  • Power Factor, cos ϕ: -
  • Luminous Flux, Lm: -
  • CCT, К: -
  • CRI, Ra: -
  • Protectrion IP: 20
  • Material: -
BUY
DC-DC Driver LRC LDD-1000H

Light Route Company presents a line of step-down DC-DC drivers for LED modules. The LRC-LDD-1000H driver is a voltage converter with an input voltage range of 4.5~60 V, which is wider than the similar MeanWell LDD-1000H driver, which has an input voltage of 9~56 volts.

The converter stabilizes an output current of 1000 mA in a voltage range of 2..57 volts. The LED driver can be used for various tasks related to control, dimming and monitoring in LED lighting. The driver output voltage range is 4 volts higher than that of the similar Mean Well LDD-1000H driver.

LRC-LDD-H drivers are compact and easy to use, mounted directly on a printed circuit board. DC-DC voltage converters with PWM input dimming can be easily mounted in any luminaire. This driver is characterized by high quality and reliability, stability of parameters and technical characteristics.

LRC-LDD-H drivers are better than MW NLDD step-down voltage converters. Dimming of an LED module connected to the LDD-H driver starts with 1% brightness, and not with 10%, as in NLDD. Dimming from “zero” is important when smooth adjustment of the brightness of the luminaire is required, for precise control of LEDs.

In the near future, it is planned to release the entire line of LRC-LDD-H drivers with currents of 700, 1000, 1200, 1400, 1500 mA in a sealed housing. A two-component silicone compound will be used to seal the electronic board, and the housing will be made of ABS plastic.

Use LRC drivers with an output current of 1000 mA to adjust the brightness of luminaires, lamps, LED modules and LED lines. We also offer 12 volt power supplies and 24 V for LED strips.

▪ DC/DC step-down converter;
▪ Constant output current: 1000 mA;
▪ Wide input voltage: 4.5~60 VDC;
▪ Wide output voltage: 2~57 VDC;
▪ High efficiency up to 95%;
▪ Built-in EMI filter, without additional input filter and capacitors;
▪ Built-in dimming with PWM and remote ON/OFF control;
▪ IP20;
▪ Compact size;
▪ Low cost, high reliability;
▪ Driver for LED modules;
▪ 3-year warranty.


Powered by: K-3Soft