DC-DC step-down driver LRC-LDD-1200H

DC-DC step-down driver LRC-LDD-1200H

  • Supply Voltage, VАС: -
  • Rated Power, W: -
  • Power Consumption, W: -
  • Power Factor, cos ϕ: -
  • Luminous Flux, Lm: -
  • CCT, К: -
  • CRI, Ra: -
  • Protectrion IP: 20
  • Material: -
BUY

The driver produced by the Light Route company LRC-LDD-1200H is a step-down voltage converter, a dc-dc driver with an input voltage range of 4.5~60 V, which is wider than the similar driver MeanWell LDD-1200H which has an input voltage of 9~56 VDC.
The LRC-LDD-1200H converter stabilizes the output current of 1200 mA in the voltage range of 2..57 VDC, which allows the driver to be used for various tasks related to control, dimming and monitoring in LED lighting. It should be noted that the output voltage is 4 V higher than that of the similar Mean Well LDD-1200H driver.
LRC-LDD-H drivers are compact and easy to use as step-down voltage converters with PWM input dimming, can be easily mounted in any device or on a printed circuit board, and are characterized by stable technical and quality parameters. LRC-LDD-H drivers are better than NLDD DC-DC converters, dimming for the LED module connected to LDD-H starts from 1% brightness, and not from 10% like NLDD.
In the near future, it is planned to release the entire line of LRC-LDD-H drivers with currents of 700, 1000, 1200, 1400, 1500 mA in a sealed IP65 housing and output wires.

▪ DC/DC step-down converter;
▪ Constant output current: 1200 mA;
▪ Wide input voltage: 4.5~60 VDC;
▪ Wide output voltage: 2~57 VDC;
▪ High efficiency up to 95%;
▪ Built-in EMI filter, without additional input filter and capacitors;
▪ Built-in dimming with PWM and remote ON/OFF control;
▪ IP20;
▪ Compact size;
▪ Low cost, high reliability;
▪ Driver for LED modules;
▪ 3-year warranty.


Powered by: K-3Soft