DC-DC step-down driver LRC-LDD-1500H

LDD-1500H
LDD-1500H

DC-DC step-down driver LRC-LDD-1500H

  • Supply Voltage, VАС: -
  • Rated Power, W: -
  • Power Consumption, W: -
  • Power Factor, cos ϕ: -
  • Luminous Flux, Lm: -
  • CCT, К: -
  • CRI, Ra: -
  • Protectrion IP: 20
  • Material: -
BUY
Driver LRC LDD-1500H

Light Route Company presents a line of DC-DC drivers for LED modules. The LRC-LDD-1500H driver is a step-down converter with an input voltage range of 4.5~60 V, which is wider than that of the similar MeanWell LDD-1500H driver, which has an input voltage of 9~56 volts.

The driver stabilizes the output current of 1500 mA in the voltage range of 2..57 volts. The LED driver can be used for various tasks related to control, dimming and monitoring in LED lighting. The output voltage range of the driver is 4 volts higher than that of a similar driver Mean Well LDD-1500H.

The LRC-LDD-H drivers are compact and easy to use, mounted directly on the printed circuit board. DC-DC voltage converters with PWM dimming at the input can be easily mounted in any lamp. This dc-dc driver is characterized by high quality and reliability, stability of parameters and technical characteristics.

The LRC-LDD-H drivers are better than MW NLDD step-down voltage converters. Dimming of the LED module connected to the LDD-H driver starts from 1% brightness, and not from 10% as with NLDD. Dimming from “zero” is important when smooth adjustment of the luminaire brightness is required for precise control of LEDs.

In the near future, it is planned to release the entire line of LRC-LDD-H drivers with currents of 700, 1000, 1200, 1400, 1500 mA in a sealed case. To seal the electronic board, a two-component silicone compound will be used, and the case will be made of ABS plastic.

Use LRC drivers with an output current of 1500 mA to adjust the brightness of luminaires, lamps, modules and LED strips. We also offer AC/DC converters stabilizing the output voltage of 12 and 24 V.

▪ DC/DC step-down converter;
▪ Constant output current: 1500 mA;
▪ Wide input voltage: 4.5~60 VDC;
▪ Wide output voltage: 2~57 VDC;
▪ High efficiency up to 95%;
▪ Built-in EMI filter, without additional input filter and capacitors;
▪ Built-in dimming with PWM and remote ON/OFF control;
▪ IP20;
▪ Compact size;
▪ Low cost, high reliability;
▪ Driver for LED modules;
▪ 3-year warranty.


Powered by: K-3Soft