DC-DC step-down driver LRC-LDD-350L

ldd-700l
ldd-700l

DC-DC step-down driver LRC-LDD-350L

  • Supply Voltage, VАС: -
  • Rated Power, W: -
  • Power Consumption, W: -
  • Power Factor, cos ϕ: -
  • Luminous Flux, Lm: -
  • CCT, К: -
  • CRI, Ra: -
  • Protectrion IP: 20
  • Material: -
BUY
LED Driver LRC LDD-350L

Light Route Company, a manufacturer of LRC power supplies, has begun serial production of LDD series drivers. The product line is similar to step-down voltage converters from Mean Well. LDD-350L is one of the most popular and sought-after drivers for powering LED modules, used to adjust brightness in lamps. The LRC-LDD-350L DC-DC converter is a step-down converter with an input voltage range of 4.5 ~ 40 V, which is wider than that of a similar MeanWell power supply unit with an input voltage of 9 ~ 36 volts.

The LED power driver stabilizes the output current of 350 mA in the voltage range of 2..36 volts, which allows it to be used for various solutions related to light control, dimming and monitoring of LED lamps. It should be noted that the output voltage is 4 volts higher than that of a similar MW LDD-350L driver.

LRC-LDD drivers are compact and easy to use, as step-down voltage converters with PWM dimming, they can be easily mounted in any device or on a printed circuit board. Power supplies are characterized by the stability of technical and quality characteristics. LRC-LDD drivers are much better than NLDD DC-DC step-down converters, dimming for the LED module connected to the LDD-L starts from 1% brightness, and not from 10% as in NLDD. This feature of the drivers is important when it is necessary to provide dimming of the lamp from “zero”.

In the near future, the entire line of LRC-LDD-L drivers with currents of 300, 350, 500, 600, 700 mA in a sealed IP65 case and wires as terminals is planned for open design with IP20 protection rating. Which will further expand their scope of application.

We recommend using 350 mA DC-DC LED drivers to control street floodlights, lighting modules and LED strips, as well as in brightness controllers and lighting controls.

▪ DC/DC step-down converter;
▪ Constant output current: 350 mA;
▪ Wide input voltage: 4.5~40 V DC;
▪ Wide output voltage: 2~36 V DC;
▪ High efficiency up to 95%;
▪ Built-in EMI filter, without additional input filter and capacitors;
▪ Built-in dimming with PWM and remote ON/OFF control;
▪ IP20;
▪ Compact size;
▪ Low cost, high reliability;
▪ Driver for LED modules;
▪ 3-year warranty.


Powered by: K-3Soft