Driver for LED modules LRC-50-500

Driver for LED modules with a power of 50 W, a current of 500 mA – model LRC-50-500, available in two versions: for indoor use IP20; in a sealed IP66 housing. LED driver for powering LEDs with a current of 500 mA is designed for use in suspended linear luminaires. The maximum voltage drop on the LED module is 100 V, the open circuit voltage is 105 V. All models of LED drivers from the 2025 product line have such important options as the smart protection function against voltage of 380 V, AC at the input and an active output current ripple filter. This driver can be purchased at a low price with a degree of protection IP20 and together with the linear led module.

Among the general characteristics of the LRC-40 and LRC-60 series LED drivers: current stabilizers; active power factor corrector; galvanic isolation; automatic recovery after short circuit; protection against microsecond pulses with an amplitude of up to 4 kV; output current accuracy +/- 3%.

Main features of the LRC-40-1000 IP66 LED driver:

• 500 mA current driver
• power 50 W
• input voltage in the range of 175..300 VAC
• active PFC
• high efficiency up to 92%
• galvanic isolation
• electrical insulation strength input-output 4000 VAC
• output protection: automatic recovery after short circuit, long time of operation in idle mode
• protection function against supply to the input 380VAC
• IP protection 20 or 66 (sealed case)
• high reliability, low price
• manufacturer’s warranty – 3 years
• service life – 5 years
  

Recommendations:

• The operation of the power supply with a connected LED module and a demonstration of functions in real time can be seen in the Video LED driver LRC is protected from 380 VAC at the input.
• Use the LRC-40-1000 driver to power LED modules in street lamps.