LED module 24 LEDs Samsung.

LED module 384-R0 is designed for use in linear lamps for office lighting. On the LED module board, 24 LEDs are evenly spaced along the length of 278 mm, which allows the LED module to be used in Armstrong-type lamps. By connecting eight LED modules in parallel in the lamp and using the LRC-60-600 power supply with an output current of 0.6 Ampere, we will get a ceiling lamp with a power of 50 W.

LED module 24 LEDs is used as a light source in the production of linear office lamps, it is possible to use it in LED profiles for the production of various luminous structures. The module base is an aluminum printed circuit board, 1 mm thick, with a conductive copper layer of 1oz (35 microns). Suitable for most Darkoo, Ledil and Herculux linear lenses.

The 0P24S circuit provides for connection from a source with an output voltage of at least 72 V and a current of no more than 175 mA. This module is rarely used alone in a luminaire, most often 3-4 pieces. For power, use 350 mA LED drivers.

Four LED modules connected in parallel and connected to the LRC-50-500 power supply will consume 40 watts. Using the LRC-25-350 driver will allow you to get a nominal power of 25 W when assembling 3 parallel-connected LED lines 384-R0. The light output can exceed 150 Lm/W and at a current below 100 mA – not less than 160 Lm/W.

At the request of the Customer, for convenient and quick connection between the LED module 24 LEDs can be equipped with SMD 1-pin connectors.