LED module 378-R0 84 leds 2835/3030 7P12S

On the LRC.COM.UA website you can buy an 84 LED module. The 378-R0 module is used as a light source in the production of LED street lights, LED floodlights and industrial lamps. The module is based on an aluminum printed circuit board, 2 mm thick, with a conductive copper layer of 2oz (70 microns). Can be supplied complete with a DK-252*70-136*78-TP-II-S-84H1-H lens for 84 Samsung LM281B+ type 2835 or Seoul 3030 LEDs. The lens from the manufacturer Darkoo is equipped with a sealing silicone gasket for the production of IP65 and higher luminaires.

Manufacturers of street lamps and console luminaires use this LED module in modular lighting poles. The Light Route company offers poles with built-in luminaires based on LED modules with a radiator. Modular lighting poles are designed to illuminate residential complexes, parks, squares, gas station areas and supermarket parking lots.

Recommendations for using an 84 LED module.

Before buying an LED module, you need to decide on the power of the lamp in which it will be used. The power determines the current of the driver used to power the LEDs, so to obtain a nominal value of 43 watts, you need to use led driver LRC-60-1200.

The manufacturer of lenses for the LED module offers a wide range of lenses with different light distribution curve and angles. Deep KSS with angles of 25-30 degrees, optics forming a cosine LDC, asymmetric lenses for road lighting.

If the rated power of the LED module exceeds 20 W, it is necessary to use a radiator. An aluminum plate with a thickness of 2 mm can be used to remove heat from the LEDs. When purchasing, you can order the manufacture of this module on a radiator from us. Our specialists will calculate the radiator for your lamp, floodlight or modular support.