LED module 500-R01 12 LED 5050 0P12S/2P6S

LED module 500-R01 with 12 LEDs of type 5050 is used in street lamps, lamps, spotlights, in commercial and industrial lighting. The LED module is made on a printed circuit board made of aluminum, 1.5 mm thick, conductive copper layer 1oz (35 microns). The board topology provides for two LED switching schemes: 0P12S – 12 LEDs in series; 2P6S – 6 LEDs in series, two parallel groups.

LEDs of the 5050 form factor from manufacturers OSRAM, SEOUL or Samsung most often have a voltage drop of 6 volts. The 2P6S circuit is more convenient, since the total voltage drop across the module is 36 V and the choice of drivers for LEDs will be wider.

A wide range of lenses for LEDs is offered for this LED module. Light Route offers optics for LED from the manufacturer HERCULUX:

• PMMA lens HK-173@09-90-5050-#0-1g-12.
• PMMA lens HK-173@08-140-5050-#0-1g-12.
• PMMA lens HK-173@12-30-5050-20-1g-12.
• PMMA lens HK-173@10-60-5050-#0-1g-12.
• PMMA lens HK-173@11-50X148-5050-#0-1g-12.

We produce LED modules on 5050 LEDs, offering the buyer a wide choice of color temperatures from 2700 to 6500 Kelvin and different color rendering index of LEDs CRI from 70 to 90+. Light output Lm/W. With a CRI value of 72, the light output can reach 180 Lumens per Watt, but the quality of light is lower than with an index of 90+.

We recommend ordering this module with a 2P6S connection scheme, then using the LRC-40-1000 led driver, you can assemble prospector with a power of 40 W. The use of an LED module, a lens with a sealing gasket and a driver for led module in a moisture-proof IP66 housing solves any outdoor lighting problem. For the convenience of connecting the LED power supply, a 2-pin SMD-2P-A connector is installed on the module.