Linear LED module LU-IT-R1
Linear LED module LU-IT-R1
- Supply Voltage, VАС: -
- Rated Power, W: 18W
- Power Consumption, W: -
- Power Factor, cos ϕ: -
- Luminous Flux, Lm: -
- CCT, К: 3000..6500К
- CRI, Ra: >80
- Protectrion IP: 20
- Material: Aluminium
Linear LED module LU-IT-R1.
Linear LED module LU-IT-R1 is an aluminum-based LED module, developed and manufactured by LRC. SMD 2835 LEDs in the amount of 60 pieces are evenly distributed along the length of the LED line 494 mm long. The main advantage of LU-IT-R1 LED modules is the ability to divide into segments of 12 LEDs connected in parallel. In fact, the linear LED module is a 12P5S LED connection scheme, which allows it to be used with LED drivers of 700 mA and higher. When used with a 1200 mA LED driver, the module consumes 18 W.
Installation of the LED module into the LED profile using 3M adhesive tape applied to the back surface of the aluminum board. Installation in the corresponding grooves in the aluminum profile is possible, but with a limitation of the supply current (no more than 350 mA), then the module power does not exceed 5 W and mounting the board directly to the radiator surface is not required.
Suggested use:
- in linear pendant lamps;
- with LRC-40-700 led driver;
- for lighting shop windows;
- for accent lighting in the interior;
- light for the kitchen work area;
- installation in an aluminum profile;
- mounting in a niche, cornice or groove.
Technical specifications of the LED module:
- Dimensions: 494x11x1 mm;
- 60 LEDs 2835;
- LED brand SAMSUNG;
- CCT: 3000..6500K, CRI>80;
- Rated current 700 mA;
- power 10.5 W;
- mounting on the profile: 3M tape/glue.
