LED driver LRC-40-1000 IP66

Світлодіодний драйвер 1000 мА
Світлодіодний драйвер в герметичному корпусі
UA Certification LRC drivers
Світлодіодний драйвер 1000 мА
Світлодіодний драйвер в герметичному корпусі
UA Certification LRC drivers

LED driver LRC-40-1000 IP66

  • Supply Voltage, VАС: 175-300
  • Rated Power, W: 40
  • Power Consumption, W: -
  • Power Factor, cos ϕ: >0.97
  • Luminous Flux, Lm: -
  • CCT, К: -
  • CRI, Ra: -
  • Protectrion IP: 20/66
  • Material: ABS
BUY
LED driver LRC-40-1000 IP66

1000 mA LED driver – LRC-40-1000, model 2025 in a sealed housing with IP66 protection. The LRC-40-1000 LED driver is designed to power LEDs with a constant current of 1000 mA. The maximum voltage drop on the LED board is 40 V, the open circuit voltage is 45 V.
All models of LED drivers from the 2025 product line have smart protection function against 380 VAC and an active output current ripple filter. You can buy led driver with an IP20 protection, price is lower. Please, pay attention when purchasing.
Among the general characteristics of LED drivers of the LRC-40 and LRC-60 series: current stabilizers; active power factor corrector; galvanic isolation; automatic recovery after short circuit; protection against microsecond pulses with an amplitude of up to 4 kV; output current accuracy +/- 3%.

Main features of the LRC-40-1000 IP66 LED driver:

  • 1000 mA current stabilizer
  • 40 W power
  • input voltage in the range of 175..300 VAC
  • active PFC
  • high efficiency up to 92%
  • galvanic isolation
  • electrical insulation strength input-output 4000 VAC
  • output protection: automatic recovery after short circuit, long time of operation in idle mode
  • protection function against supply to the input 380VAC
  • driver in a sealed IP66 case
  • high reliability, low price
  • manufacturer’s warranty – 3 years
  • service life – 5 years

Recommendations:

MODEL LRC-40-1000
INPUT INPUT VOLTAGE 175..300 VAC. Frequency 50 ± 5 Hz
EFFICIENCY =>92,0%
POWER FACTOR cosϕ > 0,97/230 VAC
OUTPUT NOMINAL CURRENT 1000 mA
VOLTAGE RANGE 25..40 VDC
NOMINAL POWER 40,0 W
CURRENT RIPPLE < 2%
OPEN CIRCUIT VOLTAGE 45 V
SET UP TIME < 1s
CURRENT TOLERANCE +/- 3%
PROTECTION SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed
380 VAC Shut down output voltage when the input voltage exceeds protection voltage, recovers automatically after fault condition is removed. Cап survive input voltaqe stress of 440Vac fог 48 hours
SURGE 4КV/Line-Line
ENVIRONMENT WORKING ТЕМР. -30 ⁰С – +50 ⁰С
МАХ. CASE ТЕМР. 75 ⁰С
STANDARTS ДСТУ EN 61347-1:2018, ДСТУ EN 61347-2-13:2017, ДСТУ EN 55015:2017, ДСТУ EN 61000-3-2:2016, ДСТУ EN 61000-3-3:2017, ДСТУ EN 61547:2016
SIZE 30х39х130 mm
WEIGHT 0,25 kgs

Powered by: K-3Soft